Loading... Please wait...

Our Newsletter


Stainless Steel Filter Guard

  • Image 1
  • Image 2
  • Image 3
Price:
$6.00
Weight:
0.02 LBS
Shipping:
Calculated at checkout


Product Description

Protect your shrimp and fish fry!
 
The mesh holes are large enough to prevent them from clogging easily, however they are small enough to protect fry and shrimp.
 
Specs :
 
SS - T-316 Stainless steel wire mesh (higher level of corrosion resistance than that offered by T-304 Stainless Steel Wire Mesh)
Don't buy inferior product that uses 304 SS mesh
 
Rubber - Marine grade tubing (won't deteriorate over time)
Don't buy inferior product that has regular tubing and will break down
 
Seams - Seams are folded into each other which takes a bit of time to get perfect. Folding the seam won't letting anything get sucked through the seam part
Don't buy inferior product that have the seams just lay on each other
 
Mesh Hole Size:
Original - smaller mesh meant for fry and shrimp tanks
New - larger mesh meant for catching small debris (add $1 to all prices for this mesh)
 
 
Remember they are all handmade and take time to make but also can’t be all completely 100% exactly the same as pictured above. I will try my best to get them all to look the same.
Also please rinse them again in HOT water before using. I've already rinsed them once.
 
Sizes you pick/order is on you, I will test fit everyone I sell before shipping on the correct mm sizing tubes.
 
Filter sizes we know of:
 
Eheim 2232, 2211, 2213, and 2215 = 13mm
Eheim 2217, 2026 = 16mm
Aquaclear 20, 30, 50 = 17mm
Aquaclear 70, 110 = 26mm
RenaStar XP1, XP2, and XP3 = 22mm
Red Sea nano/Azoo palm = 13mm
Zoomed 501 = 9mm
Fluval 206, 305, 406 = 17mm
Fluval G6 = 24mm
Toms Rapid mini = 13mm
Fluval C-Series Power Filter C2/C3 = 18.75mm (YOU MUST CUT THE STOCK PLASTIC RIBBED GUARD OFF TO FIT THIS PROPERLY)
Marineland Penguin 160 and 100 = 17mm
Marineland Penguin 100 and 200 = retangle/squared
Penn Plax Cascade 500, 700 = 16mm
Bio-Maxx 10 = 16mm (per customer said)
 
 
Price Per: One guard in selected size
 
Please note: if you dont see a size listed for your filter please contact us, we can make mostly any custom size possible.

Find Similar Products by Category

Write your own product review

Product Reviews

Showing reviews 1-10 of 77 | Next

  1. fits perfectly 5 Star Review

    Posted by on 17th Sep 2019

    Ordered this to put on my Fluval canister intake pipe. I have just ordered shrimp for my planter aquarium and wanted a solution to keep the shrimp out. It fits perfectly. Great job great service.


  2. Great quality and fit! 5 Star Review

    Posted by on 5th Aug 2019

    22mm model fits great over the JARDLI Metal Lily pipes 16/22mm from amazon!


  3. Great Pre-Filter 5 Star Review

    Posted by on 27th May 2019

    This is a perfect fit for the Aquaclear 20 filter (17mm)...I replaced the bulky Fluval pre-foam with the larger mesh model in an Edge 6 gallon aquarium, not only does it look so much better but also maintains a strong flow and is super easy to clean when needed. Great workmanship, will be purchasing another for a backup in the near future...


  4. Fits Perfect 5 Star Review

    Posted by on 17th Apr 2019

    Just what I needs to keep my filter from eating my little babies.


  5. Great for protecting my shrimp 5 Star Review

    Posted by on 13th Nov 2018

    Perfect fit and works like a charm.


  6. Great for protecting my shrimp fry from my Aqua Clear 110 5 Star Review

    Posted by on 24th Jul 2018

    I resorted to using the foam 'pre filters' that go over the Aqua Clear inlet tube, but I found these after a while always got gunked up by bacteria and developed a film which showed the flow, cleaning of these sponges became less and less of a solution over time.

    I read some positive reviews on people using this product on their filters and thought I'd give it a try.
    The flow for my filter with this has not been impeded and has been rather quick and easy to clean if needed.
    I have not seen the same issue where a film develops over time like I have using sponges either.

    So far these have been the best solution I have come across and would highly recommend them.


  7. Low Profile 5 Star Review

    Posted by on 24th Feb 2018

    This is a low profile alternative to a spounge on the intake of my fluval 206 canister only negative if you don’t keep it clean flow can be slowed but it’s a quick fix and way more aesthetically pleasing


  8. Great Stainless steel prefilter! 5 Star Review

    Posted by on 25th Dec 2017

    Han provides fast and great Customer Service and troubleshooting! The stainless steel filter fits great into my intake tube, and I just needed to heat the rubber a bot to make it an extremely snug fit! I'm still using the dry start method so I can't tell if it'll keep 100% of the shrimplettes out of the filter but I will know by 7 months or so from now. It certainly looks like it'll keep small shrimp safe.


  9. Perfect Cover 5 Star Review

    Posted by on 17th Dec 2017

    Slid on easy, and is strong. Much stronger than I expected. Was a perfect fit for my intake. This is much better than cleaning a sponge every other day. The water flow for my filter is great, once again.


  10. Excellent quality 5 Star Review

    Posted by on 8th Nov 2017

    Very happy with this product. Fit like a glove.


Showing reviews 1-10 of 77 | Next

Add to Wish List

Click the button below to add the Stainless Steel Filter Guard to your wish list.

You Recently Viewed...